Home › Home air conditioning › Bedrooms
Most bedrooms we fit need one small wall-mounted unit, a single hole through an outside wall and an outdoor unit on a bracket or on the ground. It is usually done in a day, the same unit heats in winter, and you can see a price before anyone visits.
Free survey, no obligation. 0% VAT on home installations. F-Gas registered company (FGAS3011677).

Size is mostly about floor area, then adjusted for things that add heat: a top-floor room, a flat roof above, or big south or west-facing windows. These are the starting prices from our instant price calculator for one room, fully supplied and fitted.
| Room | Floor area | Unit size | Fujitsu, from | Mitsubishi Electric AY, from | Daikin Perfera, from |
|---|---|---|---|---|---|
| Small bedroom or box room | 5–10 m² | 2.0 kW | £2,300 | £2,450 | £2,500 |
| Standard double | 11–18 m² | 2.5 kW | £2,400 | £2,550 | £2,600 |
| Large bedroom or main suite | 19–29 m² | 3.5 kW | £2,500 | £2,650 | £2,700 |
A concealed (ducted) system starts from £4,200 per room. Home installations are zero-rated for VAT, so there is no VAT to add. Your final price is fixed after the survey, so it will not change on the day.
These are our standard options. The prices above are for the systems we fit most often: Fujitsu, Mitsubishi Electric AY, Daikin Perfera and concealed ducted. Other brands and models are available if you would prefer, such as other Daikin and Mitsubishi Electric ranges, Toshiba, LG, Samsung or Panasonic. Just ask and we will price it for you.
Most bedroomsFixed high on an outside wall so the pipe run is short and tidy. It is the quickest and cheapest option and the one we fit in most bedrooms. Premium models such as the Mitsubishi Electric Zen cost a little more but look neater.
Loft rooms, low wallsSits low, like a radiator. It suits loft bedrooms where the wall under the slope is too short for a wall unit, or rooms with wide windows and little clear wall above them.
Refurbs, from £4,200The unit is hidden in the ceiling or above a wardrobe and all you see is a slim grille. It needs a ceiling void, so it makes most sense while a room is being renovated.
Indoor unit. The units we fit are inverters, so once the room reaches temperature they slow right down rather than switching on and off. Most have a night or quiet mode. We position the unit so the air runs along the ceiling and across the room, not straight at the bed.
Condensate drain. Cooling produces water, which we run out by gravity wherever we can. Where we can’t, we fit a small pump, and we choose and place it with a bedroom in mind because a cheap pump is the most common source of a night-time hum.
Outdoor unit. We keep it away from your bedroom windows and your neighbours’. For permitted development the outdoor unit also has to meet a noise standard (MCS 020a) at the neighbour’s nearest window.

The short version for houses in England: an air conditioner that heats as well as cools (an air-to-air heat pump) can be permitted development, so no planning application, as long as it meets the national conditions. It must not be used only for cooling. On a terraced or semi-detached house only the first outdoor unit is covered. It can’t go on a pitched roof, or above ground-floor level on a wall that faces the road. In a conservation area it can’t go on a wall or roof facing the road at all, and listed buildings always need consent.
Flats are different: you will normally need written consent from your freeholder or managing agent under your lease. Councils can also remove permitted development rights with an Article 4 direction.
Source: Planning Portal, air source heat pumps. If your home is listed, in a conservation area or covered by an Article 4 direction, check with your council before work starts.
If you want two or three bedrooms done in a terraced or semi-detached house, ask about a multi-split: several indoor units run from one outdoor unit, which keeps you to the single outdoor unit that permitted development allows.
Yes. Use the night or quiet mode, set a comfortable temperature rather than the lowest one, and make sure the airflow isn’t aimed at the bed. A well-sized inverter unit will tick over quietly once the room has cooled.
Cooling removes some moisture, which most people find makes a humid summer night more comfortable. If the room feels dry, raise the set temperature a degree or two or switch to fan mode.
Yes. Every system we fit is a heat pump, so the same unit heats and cools. Using it for heating is also what makes it eligible for permitted development on a house.
Most single-room installs take 4 to 8 hours. Loft rooms and long pipe runs take longer, and we will tell you on survey.
Only with your landlord’s written permission, and usually the freeholder’s or managing agent’s as well. We can provide the unit details and a short description of the work for them.
Once a year keeps it efficient and protects the warranty. Our servicing starts from £120 + VAT for one unit, with the congestion charge and parking added only where they apply.
Tell us the room size and we will show you four options with fixed starting prices.